per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
2
5
29327
Research Paper
اشاره
Note
مهدی مدیری
mmodiri@ut.ac.ir
1
دانشیار دانشگاه صنعتی مالک اشتر
سیستم اطلاعات جغرافیایی (GIS) مانند دیگر سیستم های اطلاعاتی، از سیستم های فرعی تشکیل یافته است.
· سیستم فرعی ورودی داده ها؛
· سیستم فرعی ذخیره داده ها و بازیاب آنها؛
· سیستم فرعی پردازش و تجزیه و تحلیل داده ها؛
· سیستم فرعی خروجی اطلاعات.
سیستمی را می توان یک GIS دانست که سیستم نرم افزارش شامل تمامی چهار عملکرد فوق باشد. بیشتر سیستم های دیجیتالی تهیه نقشه، سیستم های سنجش از دور و سیستم های تهیه نقشه های موضوعی براین اساس، یک GIS نیستند.
امروزه مدیریت پایگاه داده ای و تحلیل، عملکردهای مهمی هستند ولیکن ممکن است در آینده عملکردهای مدرنی چون به کارگیری هوش مصنوعی یا تجسم مطرح شود که از خصوصیات برجسته GIS خواهد بود و دلیلی وجود ندارد که GIS فقط به تکنولوژی محدود شود.
GIS, like other information systems, consists of sub systems. • Data entry sub-system; • storage and data-recovery Subsystem; • processing and data analysis Subsystem; • Information outlet Subsystem.
A system can be called a GIS whose software system includes all four of the above functions. Consequently, most digital mapping systems, remote sensing systems, and thematic mapping systems are not GIS.
Today, database management and analysis are important functions, but in the future, modern functionalities such as the use of artificial intelligence or visualization might come about, which will be among the most prominent features of GIS, and there is no reason why GIS should be limited only to the technology.
https://www.sepehr.org/article_29327_4dad6b2b232f98a3906b56c59ced8ee0.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
6
10
29328
Research Paper
کاربرد فتوگرامتری رقومی فواصل نزدیک در یک پروژه کشتی سازی
Application of Short-Range Digital Photorammetry in a Ship-Building Project
عباسعلی صالح آبادی (مترجم)
1
سیستم های اتوماتیک یا نیمه اتوماتیک فتوگرامتری رقومی فواصل نزدیک یکی از ابزار دقیق و کارآمد برای اکثر اندازه گیری ها در تولیدات صنعتی می باشد.
این مقاله تجربیات و نتایج مطالعات راهبردی بر روی یک پروژه فتوگرامتری رقومی فواصل نزدیک در فرآیند تولید را کارشناسی کرده و نشان می دهد. این نتایج مربوط به کاربرد این تکنیک در تولید و کنترل کیفیت اجرا شده در یک کارخانه کشتی سازی آمریکای شمالی است.
مقاله حاضر نتیجه یکی از پنج بررسی و مطالعه راهبردی اجرا شد توسط انستیتو ژئودزی و فتوگرامتری، ETH زوریخ، در یک کارگاه کشتی سازی به نام (BIW) در ایالت Mainc آمریکا را نمایش می دهد.
هدف از این بررسی ها و مطالعات کارشناسی در واقع یک ارزیابی دقیق از اجرای سیستم های مدرن فتوگرامتری رقومی در امر اندازه گیری وقایعی می باشد که در طول مراحل تولید و کنترل کیفیت آنها در یک کارگاه کشتی سازی رخ می دهد.
پروژه ارائه شده در اینجا کنترل ابعادی از قسمت های مختلف بدنه یک کشتی قبل از نصب و ساخت نهایی است. در کارگاه BIW قسمت های مختلف بدنه به ابعاد اسمی 12 متر×25 متر× 25 متر و به وزن چند صد تن برروی همدیگر قرار گرفته و سپس آنها را به طور مجزا آماده و برروی همدیگر سوار می نمایند، و نهایتاً آنها را در داخل قسمتی از بدنه کامل شده کشتی، واقع شده در لنگرگاه ساختمانی به طور کامل نصب می نمایند.
این روش نصب و انطباق قطعات با یکدیگر در ساخت کشتی، معمولاً به واسطه آزادی عمل منجر به افزایش هزینه مالی می شود.
Automatic or semi-automatic short-range digital photogrammetric systems are among the most accurate and efficient instruments for most measurements in industrial production. This paper examines and illustrates the experiences and results of strategic studies on a short-range digital photogrammetric project concerning the process of production. These results are related to the application of this technique in the production and quality control carried out in a North American shipyard.
The present article is the result of one of the five strategic research studies conducted by the ETH Institute of Geodesy and Photogrammetry of Zurich, at a shipyard workshop called (BIW) in Mainc, USA.
The purpose of these studies is, in fact, an accurate assessment of the implementation of modern digital photogrammetric systems in the measurement of events occurring during the production stages and their quality control in a shipyard workshop.
The project presented here is the dimensional control of various parts of the body of a ship before it is installed and finalized. In the BIW workshop, the various parts of a body with a nominal dimension of 12 x 25 x 25 meters and weighing several hundred tons are placed on each other and then they are individually prepared and then assembled, and eventually set in a part of the full body of the ship, which is placed in the shipyard.
This method of installing and fitting parts in the construction of ships usually results in an increase in financial costs due to freedom of action.
https://www.sepehr.org/article_29328_4a065a71c965d7a0a007129a3847b7e0.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
11
16
29330
Research Paper
اشاره ای به مبانی و اصول دورکاوی قسمت دوم
A Note on the Principles of Remote Sensing - Part II
مهدی مدیری
mmodiri@ut.ac.ir
1
دانشیار دانشگاه صنعتی مالک اشتر
دورکاوی یا سنجش از دور دانشی است که با اندازه گیری از فاصله دور و بدون تماس فیزیکی، اطلاعات ارزنده ای را نسبت به اشیاء و پیده های زمین ارائه می نماید. در دورکاوی، اطلاعات قابل بهره برداری از طریق اندازه گیری و ثبت انعکاس امواج الکترومغناطیسی جو و سطح زمین می باشد که به وسیله سنجنده ای که برروی ماهواره ها تعبیه شده، دریافت و پس از مورد تجزیه و تحلیل قرار دادن، اطلاعات لازم استخراج می گردد. در برخورد امواج الکترومغناطیسی با هر پدیده، سه عامل عمده انعکاس، جذب و عبور صورت می گیرد که میزان هر یک به طول موج انرژی تابیده و نیز خصوصیات فیزیکی و شیمیایی آن پدیده بستگی دارد و میزان انعکاس انرژی از هر پدیده روی زمین تابعی از طول موج، خواص ملکولی و درون سلولی پدیده و سایر خصوصیات فیزیکی و ظاهری اشیاء مورد اندازه گیری می باشد. اطلاعات ماهواره ای حاصله در ابتدا دارای خطاهای مختلف ژئومتری و رادیومتری است که متأثر از وضعیت ماهواره و سنجنده و شرایط جوی و خطاهای هنگام ثبت، انتقال اطلاعات و دیگر موارد ناشی از آن است. اطلاعات ماهواره ای پس از انجام تصحیحات ژئومتری و رادیومتری دارای ارزش شده و سودمند می گردند. با انجام تحصحیحات هندسی، اطلاعات ماهواره ای آماده تجزیه و تحلیل و بهره برداری می شود.
Remote sensing is a science that provides valuable information on objects and land features by measuring distances from afar and without physical contact. In remote sensing, information can be obtained by measuring and recording the reflections of electromagnetic waves of atmosphere and ground level, which are received by sensors installed on satellites, and after their analysis, the necessary information is extracted. There are three major factors of reflection, absorption and passage in the collision of electromagnetic waves with any phenomenon, each of which depends on the wavelength of radiated energy and physical and chemical properties of the phenomenon, and the energy reflection from any phenomenon on the Earth is a function of wavelength, molecular and intracellular properties of the phenomenon and other physical characteristics of the objects under measurement. The satellite data originally contains various geometric and radiometric errors that are affected by satellite, sensor and atmospheric conditions, as well as errors in recording, transmission of information and other related issues. Satellite data become valuable and useful after making geometric and radiometric corrections. By performing geometric corrections, satellite information is readily to for analysis and utilization.
https://www.sepehr.org/article_29330_cab65dfab543a0507f85d2f1da9f66ce.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
17
22
29332
Research Paper
مزایای کاربرد سیستم GPS همراه با Glonass
Advantages of Integrated GPS/GLONASS Operations
عباسعلی صالح آبادی (مترجم)
1
سیستم ناوبری ماهواره ای روسیه به نام Glonass معروف شده و اواخر سال 1995م کامل خواهد شد. این سیستم شامل 24 ماهواره می باشد که در سه مدار بیضی شکل، و در فاصله 19،100 کیلومتری از سطح زمین قرار دارد. این ماهواره ها سیستم Glonass را معرفی می کنند، که در معرض مقایسه با سیستم آمریکایی مشابه خودش قرار گرفته است. در اینجا سوالی که مطرح می شود این است که چه مزیتی در کار هر دو سیستم با یک گیرنده وجود خواهد داشت. در حال حاضر هر دو سیستم ناوبری که در حال اجراء هستند مورد بررسی قرار می گیرند. سیستم آمریکایی به نام GPS و Glonass شامل 24 ماهواره می باشند. هر چند مشابهت های فراوانی بین دو سیستم وجود دارد، ولی خصوصیات هر سیستم کاملاً مختلف می باشند به گونه ای که در اجرای سیستم مؤثر نمی باشند.
Russia's satellite navigation system, known as Glonass, will be completed in late 1995. This system consists of 24 satellites, which move in three elliptical orbits, at a distance of 19,100 kilometers from the Earth’s surface. These satellites introduce the Glonass system, which is subject to comparisons with its American counterpart. The question here is that what advantages there are in using either of these systems with a receiver. Currently, both of the navigation systems that are in operation are being investigated. The American system called GPS and Glonass each include 24 satellites. Although there are many similarities between the two systems, their characteristics are completely different, so that they are not effective in running the system.
https://www.sepehr.org/article_29332_03ff5adc443ae64ef1e819741ef995ec.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
23
26
29333
Research Paper
جاذبه های توریستی سیستان و بلوچستان
Tourist Attractions of Sistan and Baluchistan
حسن بیک محمدی
h.bekmohammadi@yahoo.com
1
استادیار دانشگاه اصفهان
تا سی سال پیش در سطح جهان، جهانگردی و سفرهای بین المللی حتی برای کسانی که از توان اقتصادی بالایی برخوردار بودند امری لوکس و فانتزی محسوب می شد در حالی که امروزه صنعت توریسم به صورت یکی از بزرگترین صنایع جهان درآمده است.
تعداد جهانگردان بین المللی که در سال 1950م از 25 میلیون نفر متجاوز نبوده در سال 1993م به بیش از 500 میلیون نفر افزایش یافته است. در این مدت درآمد حاصل از این صنعت از 1/2 به 304 میلیارد دلار رسیده است. براساس گزارش سازمان جهانی جهانگردی سهم کشورهای خاورمیانه، آسیای جنوب غربی و شمال آفریقا از این درآمد تنها 4 درصد بوده است. در حالی که درآمد کشور اسپانیا به تنهایی بیش از درآمد نفتی تمامی کشورهای اطراف خلیج فارس و سهم کشور اندونزی معادل 3/3 میلیارد دلار و سهم کشور فرانسه از این صنعت نزدیک به یکصد میلیارد دلار می باشد.
بی تردید کشور ما به دلیل برخورداری از شرایط متنوع آب و هوایی، تاریخ کهن، آثار متعدد باستانی، سیاحتی و زیارتی، مناظر بدیع، چشم اندازهای زیبای جغرافیایی و آثار هنری از نظر صنعت توریسم دارای جایگاه ویژه ای است که در اثر توجه بیشتر می تواند به زودی به یکی از قطب های بزرگ توریستی دنیا تبدیل گردد.
اما باید توجه داشت که یکی از واقعیت های صنعت توریسم برای هر کشور آنست که این صنعت اصولاً نه میمون است و نه مطرود، اگرچه تردیدی نیست که توسعه این صنعت از نظر درآمد ارزی و ارزش های افزوده، ایجاد اشتغال و آفرینش کار و حیات بخشیدن به اقتصادهای محلی بیجان و تعامل فرهنگ بسیار سازنده است، ولی هرگاه این صنعت در تخریب محیط های طبیعی مؤثر بوده و به ویژه به محیط های فرهنگی آسیب برساند، فوق العاده ناخوشایند است لذا باید گفت علیرغم این که توسعه این صنعت در بعد فرهنگی به همبستگی بین ملت ها و در نهایت به صلح و تفاهم بین المللی می انجامد و از نظر اقتصادی نیز منابع بیشماری را بدنبال دارد، اما در بعضی از محافل بین المللی به خاطر برخی از اثرات منفی، نسبت به رشد و توسعه آن با نگرانی و تردید می نگرند. سعی این مقاله برآن است تا صنعت توریسم را در ایران و استان سیستان و بلوچستان مورد تجزیه و تحلیل قرار دهد.
Until thirty years ago, tourism and international travel were considered to be a luxury and fantasy even for quite wealthy people, while today the tourism industry has become one of the world's largest industries.
The number of international tourists which had not exceeded 25 million in 1950 has risen to more than 500 million in 1993. During this period, revenues from this industry grew from $ 2.1 billion to $ 304 billion. According to the World Tourism Organization, the share of the Middle East, Southwest Asia and North Africa in this revenue has been only 4 percent, while Spain's income alone exceeds the oil revenue of all the Persian Gulf neighboring states, the Indonesian share is worth $ 3.3 billion, and France's share of the industry is nearly $ 100 billion. Undoubtedly, due to the diversity of weather, ancient history, several ancient and pilgrimage monuments, exquisite scenery, beautiful geographic landscapes and artworks, our country has a special potential in tourism industry which, if given due attention, it can soon become one of the world's largest tourist poles. But it should be noted that one of the realities of the tourism industry in each country is that this industry is not essentially either fortunate or despised, although there is no doubt that the development of this industry is very constructive in terms of foreign exchange earnings and added value, creation of employment, revitalizing weak local economies and cultural exchanges, but it is extremely undesirable if this industry is effective in destroying natural environments and in particular damaging culturally valuable spaces. Therefore, while, culturally, developing this industry leads to solidarity between nations and ultimately to international peace and understanding, and it also has countless economic advantages, but its growth and development is viewed in some international circles with concern and skepticism because of some negative effects. This article attempts to analyze the tourism industry in Iran and the province of Sistan and Baluchestan.
https://www.sepehr.org/article_29333_2c8d461a434c3a1bf6302320fd752985.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
27
41
29334
Research Paper
مورفودینامیک بادی و شکل های ناشی از آن در منطقه کاشان
Wind Morphodynamics and its Consequent Shapes in the Region of Kashan
عباس خسروی
bsttdmmo@gmail.com
1
کارشناس ارشد جغرافیای طبیعی
منطقه مورد مطالعه، در ایران مرکزی و درحاشیه جنوبی فرورفتگی وسیعی در امتداد شمال غرب - جنوب شرق کشیده شده قرار دارد. این منطقه بیابانی است که کویر قسمتی از آن را تشکیل می دهد، و این منطقه بیابانی است که کویر قسمتی از آن را تشکیل می دهد.
این منطقه مانند اغلب نقاط مرکزی ایران، سال هاست که مورد تهاجم ماسه است. مسئله ماسه ها بیش از همه، روستاهای شمال و شمالشرق کاشان یعنی آران و بیدگل، چهار تاقی و مجموعه های روستایی ابوزیدآباد که شامل محمدآباد، گز، فخره، قاسم آباد، یزددلان و حسین آباد است، را تهدید کرده و خانه ها، جاده ها، چاه های آب و مزارع را می پوشاند و همراه خود خشکی را در منطقه افزایش می دهد.
منطقه کاشان بخش کوچکی از یک واحد طبیعی، مورفولوژی و زمین شناسی است که خود بر دو قسمت متمایز و مشخص تقسیم می شود:
الف) برآمدگی های معروف به سلسله جبال جنوبی کاشان یا رشته کوه های کرکس که دارای امتداد شمالغرب- جنوب شرقی می باشد.
ب) گودی یا فرورفتگی قم- کاشان- اردکان
گودی قم و کاشان و اردکان در حقیقت یک دره عریض و صحرائی است که محدود به رشته کوه هایی از جنس سنگهای آتشفشانی می باشد و گسل های سرتاسری موجود در پای این رشته کوه ها باعث بالا آمدن آنها شده است. این گودی به وسیله رسوب های ضخیم و چین خورده طبقات قرمز نئوژن که قسمت هایی از آن تخریبی است در بخش دریایی تشکیلات قم دارای سن الیگو- میوسن می باشد، پرشده و به وسیله رسوب های بهادا، شن، قلوه سنگهای درشت، رسوب های پلایا و بالاخره تپه های ماسه ای پوشیده شده است.
The study area is located in central Iran and in the southern margin of a large depression along the northwest-southeast direction. This region is a desert part of which is formed by salt pan (Kavir). This region, like most of Iran's central areas, has been swept by sand for many years. The issue of sand is most threatening toward villages in the north and northeast of Kashan, namely Aran and Bidgol, and four villages of Abu Zaidabad, including Mohammad Abad, Gaz, Fakhra, Qasim Abad, Yazd Delan and Hossein Abad. It covers houses, roads, water wells and fields, and increases aridity in the area. Kashan region is a small part of a natural, morphologic and geologic unit, divided into two distinct parts:
A) Raised areas known as the southern part of Kashan mountain range, or Karkass mountain range,
(B) Depression of Qom-Kashan-Ardakan Qom-Kashan-Ardakan depression is in fact a wide plain valley that is limited to volcanic rocky mountains, and the faults lying all along the foot of this mountain range have caused it to rise. This depression, due to thick and folded deposits of Neogene red layers which are partly degraded, is filled in the sea section of Qom formations which is of the Oligo-Miocene age, and is covered by Bahada deposits, sand, large rubbles, playa sediments and finally sandy hills.
https://www.sepehr.org/article_29334_9cf3908a8be4373a35b0693264539b47.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
42
61
29335
Research Paper
سنجش از دور و مهندسی منابع آب
Remote Sensing and Water Resources Engineering
علیرضا اوسطی (مترجم)
1
منابع آب بخشی از هیدرولوژی را شامل می شود که با خصوصیات آب شناسی که به طور وضوح با بعد زمان و مکان متغیر هستند، مرتبط می باشد. اطلاعاتی که در آرشیو موجود است اساساً منابع اطلاعاتی ارزان تری را تهیه نموده و این مسئله باید قبل از آن که اقدامات جدیدی آغاز گردد مورد توجه و بررسی قرار گیرد. برای مطالعات مقیاس کوچک، اندازه گیریی ها با وسائل قرار دادی که مبناء آنها زمین است راه حل بسیار مناسبی را برای مسائل مهندسی تهیه و دراختیار قرار می دهد. وسایل مبناء زمینی، مستعد کسب داده های بسیار دقیق فوق یک گستره فرکانس های زمانی بوده و قادر هستند در هر شرایط جوی عمل نمایند. اشکال اصلی آنها اندازه گیری فقط نقطه ایست که نماینده کل است. به منظور جبران این عیب تعداد اندازه گیری زمینی می تواند نسبت به یک نقطه ای که به وسیله زمان مورد نیاز برای نصب وسائل، نیروی انسانی جهت نصب آنها، عملیات و تجزیه و تحلیل داده ها و مهمتر از همه هزینه خرید و عملیات تعیین گردیده افزایش یابد. روشهای سنجش از دور مستعد اندازه گیری تغییرپذیری سطح که هرگز نمی توانند از زمین ارزیابی شوند، بوده و تطابق دقت اندازه گیری های مبناء زمینی را نیز شامل می شوند. اندازه گیری کنترل زمینی مثل بازتاب کننده طیفی اغلب باید کسب داده های سنجنده شده از دور را همراهی نماید. به نگاره1 رجوع شود.
ادغام تعداد محدودی از اندازه گیریهای زمینی می تواند از اتلاف وقت بسیار زیاد پرسنل در صحرا جلوگیری به عمل آورد. در این بخش عملکرد سنجش از دور در راستای رفتار سنجی تغییرات هیدرولوژیکی مورد توجه مهندسین عمران است به بحث کشیده می شود.
Water resources forms part of hydrology that is linked to hydrological characteristics that are clearly variable in time and space. The information contained in the archive basically provides cheaper information sources and this issue should be considered before new measures are initiated. For small-scale studies, measurements with ground-based equipment provide a very good solution for engineering issues. Ground-based devices are able to acquire highly precise data over a range of time frequencies and are able to operate under any atmospheric conditions. Their major fault is that they perform the measurement only for one point that represents the whole. In order to compensate for this defect, the number of ground-based measurements for the point, which is determined by the time needed to install the equipment, manpower for installation, process and analysis of the data, and most importantly the cost of purchase and operation, can be increased.
Remote sensing methods are able to measure surface level variability, which can never be measured from the ground surface, and include the alignment of ground-based measurements precision. Ground-based measurement control, such as a spectral reflector, should often accompany remote sensing data acquisition. Refer to Figure 1.
Integrating a limited number of ground-based measurements can prevent great waste of the staff’s time in the desert. In this part, remote sensing performance is discussed in terms of behavioral evaluation of the hydrological changes that are of importance for civil engineers.
https://www.sepehr.org/article_29335_bf7aae5cc22eebeba311050e5c5081fd.pdf
per
سازمان جغرافیایی
فصلنامه علمی- پژوهشی اطلاعات جغرافیایی « سپهر»
2588-3860
2588-3879
1996-04-20
5
17
62
64
29337
Research Paper
تولد یک ستاره این مقاله شروعی است بر داستان زندگی یک ستاره
Birth of a Star
فاطمه رضیعی (مترجم)
1
ستاره ها با توجه به استانداردهای انسانی طول عمر بسیار زیادی دارند اما ابدی نیستند. خورشید یک ستاره میان سال است (در دوره میانی طول عمر خود قرار دارد.) نسل های قبلی ستاره ها زندگی کرده و از بین رفته اند و ستاره های جدیدی نیز هنوز هم در کهکشان ما متولد می شوند. ستاره ها از سقوط ابرهای گازی به واسطه نیروی جاذبه تشکیل می شوند. ابر تنها در صورتی صقوط خواهد کرد که چگالی آن به حد کافی بوده و نیز برای غلبه نیروی جاذبه بر فشار داخلی آن باید به حد کافی خنک و حجیم باشد. به این دلیل مطلوب ترین حالت برای شکل گیری ستاره، ابرهای مولکولی می باشد. ابرهای گازی شکل متراکم دارای مولکول های بسیار زیاد بوده و با غباری پوشیده شده که به خنک نگهداشتن آنها کمک می کند، اگر بخشی از این ابر یا کل آن به واسطه جاذبه دارای فعل و انفعالات داخلی شود احتمال دارد که به بخش های کوچک تر تجزیه شود که هر کدام از این بخش ها به صورت ستاره ای در می آیند. از این رو تشکیل شدن ستاره به صورت دسته ای اتفاق می افتد. خوشه ستاره پروین به عنوان مثال معرف گروهی از ستاره ها بوده که حدود 50 میلیون سال قبل تشکیل شده است.
Stars have incredibly long life spans by human standards, but they are not eternal. The sun is a middle-aged star (in the middle part of its lifetime). Previous generations of stars have lived and died, and new stars are still born in our galaxy. The stars are formed by the collapse of gas clouds due to gravity. The cloud will only collapse if its density is sufficient, and it should be sufficiently cool and bulky so that the gravity can overcome its internal pressure. For this reason, the most favorable condition for the formation of stars is molecular cloud. Dense-shaped gas clouds have very high number of molecules and are covered with dust that keeps them cool. If part of this cloud or the whole of it finds internal interactions due to gravity, it is likely that it decompose into smaller entities, each of which becomes a star. Hence the formation of stars takes place in batches. The Parvin (Pleiades) star cluster, for example, consists of a group of stars that have been formed around 50 million years ago.
https://www.sepehr.org/article_29337_9703c257a8194fcc133f7a4a378d0926.pdf